AS200/AS300
The Delta Compact Modular Mid-range PLC AS200/AS300 Series is a high performance multi-purpose controller designed for all kinds of automated equipment. It features Delta's self-developed 32-bit SoC CPUs for enhanced execution speed (40 k steps/ms) and supports up to 32 extension modules or up to 1,024 inputs/outputs. The AS series provides accurate positioning control for up to 8 axes via CANopen motion network and max. 6 axes via pulse control (200 kHz). It is widely used in diverse automated equipment such as electronics manufacturing, labeling, food packaging, and textile machines.
Advanced CPU Performance
- High speed execution up to 40k steps / ms
Features and benefits
- New 32-bit SoC (System on Chip) CPU to improve execution speed (up to 40,000 steps / ms)
- Positioning control function for up to 8-axis motion control via CANopen / 6-axis 200 kHz pulse control
- Special Driver up to 64 axes in CANopen DS301 mode.
- Robust backless design and patented DIN rail brackets for vertical mounting and module replacement
- ISPSoft editing software for programming, hardware configuration, network communication, system diagnostics and positioning planning
Applications
- Automated equipment such as electronics manufacturing, labeling, food packaging, and textile machines
AS200/AS300 Specifications
- New 32-bit SoC (System on Chip) CPU
- Max. I/O: 1,024
- Program capacity: AS300 series 128k steps, AS200 series 64k steps
- Data registers: 60k words
- Extension modules: max. 32 (analog modules: max.16 / communication modules: max. 4)
- Execution speed: up to 40 k steps / ms
- Basic instruction (LD): 25 ns
- Application instruction (MOV): 0.15 μs
- Abundant selection of DIO modules, AIO modules, temperature modules, load cell module and function cards.
Highly integrated software ISPSoft
ISPSoft is an integrated GUI system for monitoring programming process, hardware configuration and network configuration. For ease of programming, ISPSoft supports 4 graphic languages when working with AS300: Ladder Diagram (LD), Continuous Function Charts (CFC), Sequential Function Charts (SFC) and Structured Text (ST).
Declaration of global and local variables; Dividing the project into modules (POU); Custom function blocks; Custom data types (Structures); Task Manager; ON-LINE editing of the program; DEBUG mode.
- Data scope – data capture with program scan cycle
- Data logger – recording data to SD card (up to 65535 records)
- HWCONFIG: system build tool
- Graphical interface, input/output table, module configuration without FROM/TO instructions, CPU configuration, convenient network configurator
- EIP Builder: configuration program for working with the Ethernet/IP protocol
- COMMGR: communication program between controller and computer
- CANopen Builder: configuration program for setting up a CANopen network
Documents:
