Test modePrices and availability may contain errors.

Chelic pneumatics

127 items

  • SF5100-C6-DC24V-W ×18 + SF-5Y-U10-P-B18 — Block of 18 solenoid directional valves 5/2 on DIN rail, Ø6, 24 V DC
  • SV-5101-G-DC24V-KL — Solenoid directional valve SV 500 5/2, 1 coil, G 1/8, 24 V DC, DIN with LED
  • SV-5201-G-DC24V-KL — Solenoid directional valve SV 500 5/2, 2 coils, G 1/8, 24 V DC, DIN with LED
  • SV-5231-G-DC24V-KL-NC — Solenoid valve SV 500 5/3 closed centre, G 1/8, 24 V DC, DIN with LED
  • SV-6102-G-DC24V-KL — Solenoid directional valve SV 600 5/2, 1 coil, G 1/4, 24 V DC, DIN with LED
  • SV-6202-G-DC24V-KL — Solenoid directional valve SV 600 5/2, 2 coils, G 1/4, 24 V DC, DIN with LED
  • SV-6232-G-DC24V-KL-NC — Solenoid valve SV 600 5/3 closed centre, G 1/4, 24 V DC, DIN with LED
  • SV-8102-G-DC24V-KL — Solenoid directional valve SV 800 5/2, 1 coil, G 1/4, 24 V DC, DIN with LED
  • SV-8103-G-DC24V-KL — Solenoid directional valve SV 800 5/2, 1 coil, G 3/8, 24 V DC, DIN with LED
  • SV-8202-G-DC24V-KL — Solenoid directional valve SV 800 5/2, 2 coils, G 1/4, 24 V DC, DIN with LED
  • SV-9104-G-DC24V-KL — Solenoid directional valve SV 900 5/2, 1 coil, G 1/2, 24 V DC, DIN with LED
  • SV310-AC24-K-L — Solenoid directional valve SV310 3/2 NC, Rc 1/8, 24 V AC, DIN with LED
  • SV310-AC24-K-L-M2 — Solenoid valve SV310 3/2 NC, Rc 1/8, 24 V AC, DIN with LED, manifold ×2
  • SX5101-D2-KL — Solenoid directional valve SX 500 5/2, 1 coil, G 1/8, 24 V DC, DIN with LED
  • SX6102-D2-KL — Solenoid directional valve SX 600 5/2, 1 coil, G 1/4, 24 V DC, DIN with LED
  • SX8102-D2-KL — Solenoid directional valve SX 800 5/2, 1 coil, G 1/4, 24 V DC, DIN with LED
  • SM 5000 04MM — Connection plate with push-in fittings Ø4 (A, B) for SM5000 valve
  • SV600-F3-PF — Manifold for 3 valves SV 600, G 1/4
  • SV600-F4-PF — Manifold for 4 valves SV 600, G 1/4
  • SV600-F5-PF — Manifold for 5 valves SV 600, G 1/4
  • SV600-F6-PF — Manifold for 6 valves SV 600, G 1/4
  • SV800-F3-PF — Manifold for 3 valves SV 800, G 3/8
  • SV800-F4-PF — Manifold for 4 valves SV 800, G 3/8
  • SV800-F5-PF — Manifold for 5 valves SV 800, G 3/8
  • MFR-300-02-G-H — Micro filter regulator MFR-300 (oil mist separator) 0.3 µm, G 1/4, manual drain
  • MFRD-300-02-G-H — Micro filter regulator MFRD-300 (oil mist separator) 0.01 µm, G 1/4, manual drain
  • UF 400-03-G-W — Air filter UF 400, G 3/8, 5 µm, manual drain
  • UFDB 400-03-G-A — Microfilter UFD 400 (oil mist separator) 0.01 µm, G 3/8, automatic drain
  • NFR-300-02-G-H — Filter regulator NFR-300, G 1/4, 5 µm, manual drain, square pressure gauge
  • UFR 300-03-G-A — Filter regulator UFR 300, G 3/8, 5 µm, automatic drain, square pressure gauge
  • UFR 400-02-G-W — Filter regulator UFR 400, G 1/4, 5 µm, manual drain, square pressure gauge
  • UFR 400-03-G-W — Filter regulator UFR 400, G 3/8, 5 µm, manual drain, square pressure gauge
  • UR 300-03-G — Pressure regulator UR 300, G 3/8, square pressure gauge
  • UR 400-03-G-P — Pressure regulator UR 400, G 3/8, round pressure gauge PG-10A
  • UC 300-03-G-A — F.R.L. combination UC 300 (filter + regulator + lubricator), G 3/8, automatic drain
  • UC 400-03-G-W — F.R.L. combination UC 400 (filter + regulator + lubricator), G 3/8, manual drain
  • UC 400-04-G-A — F.R.L. combination UC 400 (filter + regulator + lubricator), G 1/2, automatic drain
  • UFC 400-04-G-A — FR.L combination UFC 400 (filter regulator + lubricator), G 1/2, automatic drain
  • UL 400-03-G — Lubricator (oil mist) UL 400, G 3/8
  • U-40D — Modular connector with clamp for U 400 series
  • UV-400 C — Type C bracket for soft-start valve UV 400
  • UV-400-04-G-2-K-L-B — Soft-start valve UV 400, G 1/2, 24 V DC, DIN connector with LED, built-in silencer
  • CVTR2093-114G-C-BS — Electro-pneumatic regulator CVTR2000, 0.09–9 bar, G 3/8, input 4–20 mA, 24 V DC
  • DN 32×100 — Cylinder ISO 15552 DN Ø32×100 mm, double-acting, magnetic piston
  • DN 32×100-LB-9DS-32F2 — Cylinder ISO 15552 DN Ø32×100 mm, LB feet, 2 magnetic sensors
  • DN 32×150-9DS-32F2 — Cylinder ISO 15552 DN Ø32×150 mm, with 2 magnetic sensors and brackets
  • DN 32×160 — Cylinder ISO 15552 DN Ø32×160 mm, double-acting, magnetic piston
  • DN 32×200 — Cylinder ISO 15552 DN Ø32×200 mm, double-acting, magnetic piston
  • DN 40×250 — Cylinder ISO 15552 DN Ø40×250 mm, double-acting, magnetic piston
  • GHB 20×125-9D-20S-2 — Cylinder with guide rods GHB Ø20×125 mm, bushings, 2 sensors CS-9D
  • GHB 20×125-S — Cylinder with guide rods GHB Ø20×125 mm, sliding bushings, magnet
  • GHB 20×150-S — Cylinder with guide rods GHB Ø20×150 mm, sliding bushings, magnet
  • GHB 25×150-9D-25S-2 — Cylinder with guide rods GHB Ø25×150 mm, bushings, 2 sensors CS-9D
  • JD 12×15-S — Compact cylinder JD Ø12×15 mm, double-acting, magnetic piston
  • JD 12×50-B-LB — Compact cylinder JD Ø12×50 mm, external rod thread, LB mounting feet
  • JD 16×30-S — Compact cylinder JD Ø16×30 mm, double-acting, magnetic piston
  • JD 63×5-S — Compact cylinder JD Ø63×5 mm, double-acting, magnetic piston
  • NA2T 6×5-B — Built-in mini cylinder NA2T Ø6×5 mm, single-acting, with fitting for Ø4
  • TD 16×50 — Twin-rod cylinder TD Ø16×50 mm, double-acting, magnetic piston
  • MDX 12×50 — Slide table MDX Ø12×50 mm, two rods, roller guides, magnet
  • MDX 12×75-BM2 — Slide table MDX Ø12×75 mm, with metal stops (BM2), magnet
  • MDX 8×50 — Slide table MDX Ø8×50 mm, two rods, roller guides, magnet
  • RTB 30 — Pneumatic rotary table RTB-30, 3.2 N·m, 180°, double-acting
  • RTL 32 — Pneumatic rotary module 90°, double-acting, with magnet
  • CRJF-01-04 — Rotary pneumatic joint CRJF, 4 channels, Rc 1/8
  • SAT-1007N — Hydraulic shock absorber, M10×1, stroke 7 mm, 6 N·m
  • HDF12×12 — Parallel gripper HDF Ø12, stroke 12 mm, low profile, double-acting, M5
  • HDM20 — Angular gripper HDM Ø20, 180° opening, double-acting, M5
  • HDP10 — Parallel gripper HDP Ø10, stroke 4 mm, double-acting, M3
  • HDP20 — Parallel gripper HDP Ø20, stroke 12 mm, double-acting, M5
  • HDP32-ST2 — Parallel gripper HDP Ø32, stroke 16 mm, double-acting, with 2 sensors
  • HDQ3-25 — Three-finger gripper HDQ3 Ø25 with round body, stroke 6 mm, double-acting, M5
  • HDQ3-32 — Three-finger gripper HDQ3 Ø32 with round body, stroke 8 mm, double-acting, M5
  • HDS20 — Angular gripper HDS Ø20 (Y-type), -10°…+30°, double-acting, M5
  • HDW 32 — Pneumatic gripper HDW Ø32, 2 fingers, wedge mechanism, heavy-duty
  • HDZ20 — Parallel gripper HDZ Ø20 with linear guide, stroke 10 mm, double-acting, M5
  • HMY34 — Angular gripper HMY Ø34 (Y-type, wedge mechanism), double-acting, M5
  • 20S — Bracket for CS-9D sensor for SDA Ø20 cylinder
  • 25S — Bracket for CS-9D sensor for SDA Ø25 cylinder
  • 32F — Bracket for sensor on DN cylinder (ISO 15552) Ø32 and Ø40
  • 80F — Bracket for sensor on DN cylinder (ISO 15552) Ø80 and Ø100
  • CS-15T — Magnetic sensor, reed switch, 2 wires, 5–120 V AC/DC, cable 1 m
  • CS-5G — Magnetic sensor, contactless, 2 wires, 5–30 V DC, cable 2 m (for grippers)
  • CS-8B — Magnetic sensor, contactless, 2 wires, 5–30 V DC, cable 2 m, Series: CS-8B
  • CS-8G — Magnetic sensor, contactless, 2 wires, 5–30 V DC, cable 2 m, Series: CS-8G
  • CS-9B — Magnetic sensor, reed switch, 2 wires, 5–120 V AC/DC, cable 2 m, Series: CS-9B, Contact rating: 6 W max
  • CS-9D — Magnetic sensor, reed switch, 2 wires, 5–120 V AC/DC, cable 2 m, Series: CS-9D, Contact rating: 10 W max
  • CS-9DP — Magnetic sensor, contactless PNP, 3 wires, 5–30 V DC
  • CS-9H — Magnetic sensor, 2 wires, 5–240 V AC/DC, cable 2 m
  • NS-8P — Inductive sensor, M8×1, PNP NO, 10–30 V DC (for HMY/HMQ/HMW grippers)
  • SQC3 10-02 — Push-in fitting, straight Ø10 – R 1/4, external thread, Chelic SQC3
  • SQC3 10-03 — Push-in fitting, straight Ø10 – R 3/8, external thread, Chelic SQC3
  • SQC3 12-03 — Push-in fitting, straight Ø12 – R 3/8, external thread, Chelic SQC3
  • SQC3 4-01 — Push-in fitting, straight Ø4 – R 1/8, external thread, Chelic SQC3
  • SQC3 4-M5 — Push-in fitting, straight Ø4 – M5, external thread, Chelic SQC3
  • SQC3 6-01 — Push-in fitting, straight Ø6 – R 1/8, external thread, Chelic SQC3
  • SQC3 6-02 — Push-in fitting, straight Ø6 – R 1/4, external thread, Chelic SQC3
  • SQC3 6-03 — Push-in fitting, straight Ø6 – R 3/8, external thread, Chelic SQC3
  • SQC3 6-M5 — Push-in fitting, straight Ø6 – M5, external thread, Chelic SQC3
  • SQC3 8-01 — Push-in fitting, straight Ø8 – R 1/8, external thread, Chelic SQC3
  • SQC3 8-02 — Push-in fitting, straight Ø8 – R 1/4, external thread, Chelic SQC3
  • SQC3 8-03 — Push-in fitting, straight Ø8 – R 3/8, external thread, Chelic SQC3
  • SQE3 10 — Push-in fitting T-shaped Ø10 – Ø10 – Ø10, Chelic SQE3
  • SQE3 8 — Push-in fitting T-shaped Ø8 – Ø8 – Ø8, Chelic SQE3
  • SQL3 10-02 — Push-in fitting, angled 90° Ø10 – R 1/4, external thread, Chelic SQL3
  • SQL3 10-03 — Push-in fitting, angled 90° Ø10 – R 3/8, external thread, Chelic SQL3
  • SQL3 6-02 — Push-in fitting, angled 90° Ø6 – R 1/4, external thread, Chelic SQL3
  • SQL3 8-02 — Push-in fitting, angled 90° Ø8 – R 1/4, external thread, Chelic SQL3
  • SQL3 8-03 — Push-in fitting, angled 90° Ø8 – R 3/8, external thread, Chelic SQL3
  • SQV3 10-10 — Push-in fitting, angled 90° tube–tube Ø10, Chelic SQV3
  • SQV3 8-8 — Push-in fitting angled 90° tube–tube Ø8, Chelic SQV3
  • QSC 8-01-A — Throttle check valve Ø8 – R 1/8, meter-out control, Chelic QSC
  • QSM 4-01 — One-way flow control valve mini Ø4 – R 1/8, Chelic QSM
  • QSM 4-M5-A — Mini throttle check valve Ø4 – M5, meter-out, Chelic QSM
  • QSM 6-M3-A — Mini throttle check valve Ø6 – M3, meter-out, Chelic QSM
  • QSM 6-M5-A — Mini throttle check valve Ø6 – M5, meter-out, Chelic QSM
  • SL-02 — Brass silencer R 1/4, sintered filter, Chelic
  • ERV 200-02-G-VG10A — Vacuum regulator ERV 200, G 1/4, −98.6…−1 kPa, with vacuum gauge VG10A
  • PAOT 10 N — Flat anti-slip vacuum suction cup Ø10, side connection, NBR, Chelic PAO
  • PAOT 20 N — Flat anti-slip vacuum suction cup Ø20, side connection, NBR, Chelic PAO
  • PAOTS 10x10 N — Anti-slip vacuum suction cup Ø10, side connection, spring 10 mm, NBR, Chelic PAO
  • PBT 10 S — Two-stage vacuum suction cup (sleeve) Ø10, side connection, silicone, Chelic PB
  • PLA TS-40x15-N-R — Long vacuum suction cup 40×80, side, spring 15 mm, ball joint, NBR, PLA
  • VFD 02 06 — In-line vacuum filter, Ø6 tube, 7.5 cm² filter, 10 µm, Chelic VFD
  • VFD 03 08 — In-line vacuum filter, Ø8 tube, 12.5 cm² filter, 10 µm, Chelic VFD
  • VFD 03 10 — In-line vacuum filter, Ø10 tube, 12.5 cm² filter, 10 µm, Chelic VFD
  • VQ20S-DC24-L-P04 — Energy-saving vacuum ejector VQ20 with filter and digital pressure switch 2×NPN, Ø6