Li Ming reducing bushing for input bore Ø14 mm and motor shaft Ø11 mm (SERVOBOX planetary gearboxes).
• The bushing is fitted into the input bore of the gearbox when the servo motor shaft is thinner than the opening; thus, the clamping hub grips the shaft without any play
• The combination of bore Ø14 mm → shaft Ø11 mm is in the Li Ming table for standard bushings
• If the shaft diameter is not in the table, Li Ming supplies the gearbox with a suitable bushing or with a larger bore plus a bushing
• The bushing is longitudinally slit and has a 1 mm flange on the outer diameter
• During installation, the bushing is inserted into the input bore before the motor; first, the flange bolts are tightened, then the clamping ring
Manufacturer: Li Ming